Patterns for Homemake

Materials Ribbon Beads Fabric Glue Needle and Thread Instructions 1. Cross the ribbon end to create the body of the fish. Allow for a small opening at the centre fold to suggest the fish’s mouth. 2. Add a drop of glue where the ribbon overlap and also on the back of the fold to hold the ribbon in place. 3. Pinch the middle of the fish and sew a few stitches to gather up the ribbon and create the fish’s tail fins. 4. Cut the remaining ribbon in half. Overlap and glue the ends on both lengths…

Materials Ribbon Beads [big and small] Fabric Glue Needle and Thread Instructions 1. Seal the edge of the ribbon with heat. 2. Turn the sealed edge of the ribbon into triangle then press and glue it. 3. Fold the ribbon down to form a large triangle. 4. From the large triangle fold in half to the right. Align the diagonal fold to a triangle petal. 5. Insert the threaded needle into the lower end of the fold and secured with a stitch. Do not cut thread. Leave needle hanging. One full point has…

Teddy Bear Pattern [012] Side Head Cut 2 Ear Cut 4 Under Chin Cut 1 Side Middle Body Cut 2 Fold Upper Inside Body Cut 1 Head Gusset Cut 1 Side Lower Body Cut 2 Fold Lower Inside Body Cut 1 Leg Cut 2 Foot Base Cut 2 2 Buttons for the Eyes 1 Nose Filling [Cotton or Beads] Note: First make the head, then the body and leg. After that turn over and add filling to the head, legs and body before stitching inside the neck open to join it into a Sweet Teddy Bear Soft Toy with nose and eyes.. Step 1…

Duckling Pattern [010] Body Base Cut 2 Wing Cut 4 Beak Cut 1 Eye Cut 2 Side Body Cut 2 Ribbon Cotton for Filling Step 1 Duckling Pattern Step 2 Add Seam Allowances

Bag Cut 1 Inside Base Cut 1 Cardboard Glue String or ribbon for the Handle Step 1 Gift Bag Pattern

Head Cut 2 Full Body Cut 2 Fold Whisker Cut 2 Whisker Ball Cut 2 Nose Ball Cut 1 Wing Cut 1 Hand Cut 4 Leg Cut 4 Filling Fabric Eye Button 2 [or Stitch it in Black] Step 1 Honey Bee Pattern Step 2 Add Seam Allowances

Wing Cut 4 Front Face Cut 1 Front Body Cut 1 Eye Cut 2 Lip Cut 1 Back Head Cut 1 Back Body Cut 1 Front Hood Coat Cut 1 Back Hood Coat Cut 1 Filling [beads or cotton] Soft toy Fabric Step 1 Ghost Pattern Step 2 Add Seam Allowances

Materials Ribbon Beads Needle and Thread Instructions 1. Cut the ribbon into square; if the width 4 cm the length should be 4 cm. 2. Seal the edge of the ribbon with heat. 3. Fold the ribbon down to form a big triangle. 4. From the big triangle fold the ribbon into half then fold the edge of both sides to smaller triangles. 5. Seal the petal sharp edge with heat. 6. Insert the threaded needle through the lower end. 7. Gather five petals to form a flower. 8. Tighten the petals to hold…

Bag [014] Pattern Bag Cut 2 Bag Lining Cut 2 Fold Tab Cut 2 Bag Bottom Cut 2 Side Bottom Cut 4 Pocket Cut 1 Zip and Hook for the bag Art Design Step 1 Bag Pattern Step 2 Add Seam Allowances

Bunny [013] Bunny [013] Pattern Head Cut 2 Ear Cut 4 Eye Cut 2 Nose Cut 1 Fold Ribbon Cut 1 Ribbon Band Cut 1 Body Cut 2 Bib Cut 2 Pant Cut 1 Hand Cut 4 Boot cut 4 Thin Sponge for Head and Body Note: Stitch the Bunny head and body with thin sponge, for the eyes and nose use craft fabric. Add extra string for Wall Hanger and black thread stitches for the lip. Step 1 Bunny Pattern Step 2 Add Seam Allowances

Materials Soft Ribbon Needle and Thread Measurement Tape Beads Fabric Marker Instructions 1. Using a marker, add marks along both selvage edges of the ribbon, one ribbon-width apart. 2. The marks will be 2.5 cm apart on 2.5 cm ribbon. The marks should be parallel. 3. With thread doubled in needle, insert needle into the ribbon at the first mark. Sew running stitches across the width of the ribbon, stopping at the opposite mark. 4. Pull up the thread to gather the ribbon.Bring the needle…

Boy Face Pattern [009] Face Cut 2 Hair Cut 1 Eye Cut 2 Left Cheek Cut 1 Right Cheek Cut 1 Filling [Cotton or Beads] Notes: For the eyes and cheeks use craft fabric as for the mouth use hand stitches or plain sewing with black thread. Use cotton or beads filling for soft toy or pillow, as for wall hanger use thin sponge. Step 1 Boy Face Pillow Pattern Step 2 Add Seam Allowances

Tea Towel Pattern [008] Tea Towel Cut 1 Fold Tab Holder Cut 1 Bias Tape Art Design Note: Use towel fabric or absorbent fabric for better wiping and drying. Step 1 Tea Towel Pattern Step 2 Add Seam Allowances

Squirrel Cat Pattern [007] Ear Inside Cut 2 Back Head Cut 2 Side Head Cut 2 Side Body Cut 2 Body Cut 2 Tail Cut 1 Foot Pad Cut 4 Filling [Cotton or Beads] Note: Use long fur fabric for the tail. First make the head, then the body with the tail. After that turn over and add filling to the head and body before stitching around the neck open to join it into a Soft Toy. Step 1 Bag Pattern Step 2 Add Seam Allowances

Bag Pattern [006] Fold Front and Back Bag Cut 1 Handle Cut 4 Step 1 Bag Pattern Step 2 Add Seam Allowances

Mouse Pattern [005] Mouse Body Cut 2 Base Cut 1 Ear Cut 2 Foot Cut 4 Eye Cut 2 Nose Cut 1 String for the Tail Cut 1 Filling [Cotton or Beads] Note: Use the fur fabric for the body and craft fabric for the foot, eyes and ears. For the eyes you can replace with black buttons. Step 1 Use Squares for the Mouse Pattern Step 2 Add Seam Allowances