clay & porcelain tutorials

8 Pins34 Followers
Now why didn't I think of that

Textured Art - "Combine the stem with a conventional medical syringe with diluted rarely, the same acrylic filler (putty dilute so that it rested on the wall and ceiling - no dripping, apply a thin layer).

Segment Shade: A slip-cast ceramic pendant lampshade designed by Philip Cuttance, London. Each shade is cast from 11 individual wedge segments and each segment is cut at a unique angle. As the designer describes it: When reassembled each face now intersects at a different angle to the adjacent wedge creating an irregular, asymmetric inner cavity where the Segment shade is slip-cast in ceramic. Each casting inherits the texture of the bandsaw cuts on the wedge faces.

Segment Shade: A slip-cast ceramic pendant lampshade designed by Philip Cuttance, London

23 Pottery Tips from A Year of Reading Pottery Blogs

Mixing Pottery Glazes

Measure water, mix in glaze powder, sieve, check density and viscosity.

After showing a few times how to make a mould, I thought it was time to show you how to use a mould with liquid porcelain clay. I will also ...

After showing a few times how to make a mould, I thought it was time to show you how to use a mould with liquid porcelain clay. I will also .

Pinterest
Search