Explore Decoding, Arduino, and more!

Explore related topics

NT-R19AM Super-Regenerative Wireless Receiving Module. Model: NT-R19AM - Color: Green + black - Material: Plastic + iron - Working voltage: DC 5.0V +/- 0.5V - Working current: - Operating principle: super-regeneration - Working mode: OOK / ASK - Frequency range: 250MHz~450MHz - Bandwidth: 2MHz - Sensitivity: Superior to -105dBm(50ohms) - Speed: - Decoding format: PT2272, HS2272, AX5327, etc. - Antenna Length: 24cm(315MHz), 18cm(433.92MHz) - Ideal for wireless remote control device, burglar…

NT-R19AM Super-Regenerative Wireless Receiving Module. Model: NT-R19AM - Color: Green + black - Material: Plastic + iron - Working voltage: DC 5.0V +/- 0.5V - Working current: - Operating principle: super-regeneration - Working mode: OOK / ASK - Frequency range: 250MHz~450MHz - Bandwidth: 2MHz - Sensitivity: Superior to -105dBm(50ohms) - Speed: - Decoding format: PT2272, HS2272, AX5327, etc. - Antenna Length: 24cm(315MHz), 18cm(433.92MHz) - Ideal for wireless remote control device, burglar…

The ESP8266 is a wonderful microcontroller. They can be purchased cheaply and have built in wifi. In this guide I will not go over how to flash the ESP8266 module with the basic firmware as this is covered on the http://ESP8266basic.com web site in detail. All the parts to build this project can be found on ebay for less than $10 shipped to the US.

Easiest ESP8266 Learning IR Remote Control Via WIFI

The is a wonderful microcontroller. They can be purchased cheaply and have built in wifi. In this guide I will not go over how to flash the module.

Roll Your Own VPN with a Raspberry Pi and OpenVPN ... A VPN or Virtual Private Network secures your internet connection from prying eyes and is critical for many of us (especially when traveling or using unsecured wireless networks). With this Raspberry Pi project, you control the VPN

Roll Your Own VPN with a Raspberry Pi and OpenVPN

A VPN or Virtual Private Network secures your internet connection from prying eyes and is critical for many of us (especially when traveling or using unsecured wireless networks). With this Raspberry Pi project, you control the VPN.

This is my first project on instructable ...This project uses ESP8266-12 to turn on and turn off wireless outlets, without any changes, using the app Blynk library Rc-switch

ESP8266-12 Standalone Blynk Control Outlets Wireless 433 Mhz

This is my first project on instructable .This project uses to turn on and turn off wireless outlets, without any changes, using the app Blynk library Rc-switch

ESP8266-12 blynk wireless temperature, humidity DHT22 sensor

ESP8266-12 Blynk Wireless Temperature, Humidity DHT22 Sensor

in this project using a to show the temperature and humidity sensor on your smartphone or sensor is much more accurate than but is also more expensive.but if you only can use the blynk wireless temperature e humidity DHT 11 sensor

finished1

How to Build a Cheap Wi-Fi Controlled Water Valve

finished1

As it was already mentioned in the Getting Started with ESP8266 ESP-01 tutorial, the Wi-Fi module is fully programmable, allowing us to use it as a microcontroller and manipulate inputs and outputs.In this tutorial we are going to show how to program the ESP module via Arduino UNO to blink an LED and control it from a wireless device.

ESP8266 As a Microcontroller

As it was already mentioned in the Getting Started with tutorial, the Wi-Fi module is fully programmable, allowing us to use it as a microcontroller.

Pinterest
Search