Pinterest

Products

389,020 Pins

18h

Collection by

Similar ideas popular now

The TrueTrac 22" x 48" Manual Slab Flattening Router Mill is designed specifically to be able to handle large area planing operations. Easily flatten large slabs, table top glue-ups, epoxy resin counter or table tops, or other large projects that don't easily fit into standard floor model equipment for a much lower cost. The Manual Feed allows the user to directly push the router back and forth across and down the length of the slab, providing hand-controlled movement. For use with a standard 2-

TrueTrac 22" x 48" Manual Slab Flattening Router Mill

The TrueTrac 48" x 96" Threaded Slab Flattening Router Mill is designed specifically to be able to handle large area planing operations. Easily flatten large slabs, table top glue-ups, epoxy resin counter or table tops, or other large projects that don't easily fit into standard floor model equipment for a much lower cost. The Manual Feed allows the user to directly push the router back and forth across and down the length of the slab, providing more movement control. For use with a standard 2-1

TrueTrac 48" x 96" Threaded Slab Flattening Router Mill

Use the TrueTrac 55" Threaded Rod Lead Screw Kit 48" Capacity to easily convert a 48" Capacity Manual Feed Slab Flattening Router Mill into a Threaded Cross Feed Unit with this fully-assembled threaded rod kit. Designed to fit within a 55" rail for the 48" width capacity units. Includes permanently sealed ball bearings, Acme lead nuts, and Acme threaded rod.

TrueTrac 55" Threaded Rod Lead Screw Kit 48" Capacity

Use the TrueTrac 27-1/2" Extension Kit for Slab Mill to extend either the length or width of your TrueTrac Slab Flattening Router Mill to expand capacity by 27-1/2". Self-aligning joints prevent misalignment and allow for easy set-up and tear down. Includes two 27-1/2" length rail extrusions, four 6" self-aligning dovetail connectors with set screws and one 1/8" L-shaped hex wrench.

TrueTrac 27-1/2" Slab Flattening Router Mill Extension Kit

Use the TrueTrac 27-1/2" Extension Kit for Slab Mill to extend either the length or width of your TrueTrac Slab Flattening Router Mill to expand capacity by 27-1/2". Self-aligning joints prevent misalignment and allow for easy set-up and tear down. Includes two 27-1/2" length rail extrusions, four 6" self-aligning dovetail connectors with set screws and one 1/8" L-shaped hex wrench.

TrueTrac 27-1/2" Slab Flattening Router Mill Extension Kit

Use the TrueTrac 27-1/2" Threaded Rod Lead Screw Kit 22" Capacity to easily convert a 22" Manual Feed Slab Flattening Router Mill into a Threaded Cross Feed unit with this fully-assembled threaded rod kit. Designed to fit within a 27-1/2" rail for the 22" width capacity units. Includes permanently sealed ball bearings, Acme lead nuts, and Acme threaded rod.

TrueTrac 27-1/2" Threaded Rod Lead Screw Kit 22" Capacity

The TrueTrac 48" x 96" Manual Slab Flattening Router Mill is designed specifically to be able to handle large area planing operations. Easily flatten large slabs, table top glue-ups, epoxy resin counter or table tops, or other large projects that don't easily fit into standard floor model equipment for a much lower cost. The Manual Feed allows the user to directly push the router back and forth across and down the length of the slab, providing hand-controled movement. For use with a standard 2-1

TrueTrac 48" x 96" Manual Slab Flattening Router Mill

Use the TrueTrac 84-1/2" Threaded Rod Lead Screw Kit 72" Capacity to easily convert a 72" Manual Feed Slab Flattening Router Mill into a Threaded Cross Feed Unit with this fully-assembled threaded rod kit. Designed to fit within a combined 27-1/2" and 55" rails for the 72" width capacity. Includes permanently sealed ball bearings, Acme lead nuts, and Acme threaded rod.

TrueTrac 84-1/2" Threaded Rod Lead Screw Kit 72" Capacity

Use the TrueTrac 55" Threaded Rod Lead Screw Kit 48" Capacity to easily convert a 48" Capacity Manual Feed Slab Flattening Router Mill into a Threaded Cross Feed Unit with this fully-assembled threaded rod kit. Designed to fit within a 55" rail for the 48" width capacity units. Includes permanently sealed ball bearings, Acme lead nuts, and Acme threaded rod.

TrueTrac 55" Threaded Rod Lead Screw Kit 48" Capacity

Use the TrueTrac 27-1/2" Threaded Rod Lead Screw Kit 22" Capacity to easily convert a 22" Manual Feed Slab Flattening Router Mill into a Threaded Cross Feed unit with this fully-assembled threaded rod kit. Designed to fit within a 27-1/2" rail for the 22" width capacity units. Includes permanently sealed ball bearings, Acme lead nuts, and Acme threaded rod.

TrueTrac 27-1/2" Threaded Rod Lead Screw Kit 22" Capacity

The TrueTrac 22" x 48" Manual Slab Flattening Router Mill is designed specifically to be able to handle large area planing operations. Easily flatten large slabs, table top glue-ups, epoxy resin counter or table tops, or other large projects that don't easily fit into standard floor model equipment for a much lower cost. The Manual Feed allows the user to directly push the router back and forth across and down the length of the slab, providing hand-controlled movement. For use with a standard 2-

TrueTrac 22" x 48" Manual Slab Flattening Router Mill

The TrueTrac 22" x 96" Manual Slab Flattening Router Mill is designed specifically to be able to handle large area planing operations. Easily flatten large slabs, table top glue-ups, epoxy resin counter or table tops, or other large projects that don't easily fit into standard floor model equipment for a much lower cost. The Manual Feed allows the user to directly push the router back and forth across and down the length of the slab, providing hand-controled movement. For use with a standard 2-1

TrueTrac 22" x 96" Manual Slab Flattening Router Mill

The TrueTrac 22" x 96" Threaded Slab Flattening Router Mill is designed specifically to be able to handle large area planing operations. Easily flatten large slabs, table top glue-ups, epoxy resin counter or table tops, or other large projects that don't easily fit into standard floor model equipment for a much lower cost. The Manual Feed allows the user to directly push the router back and forth across and down the length of the slab, providing more movement control. For use with a standard 2-1

TrueTrac 22" x 96" Threaded Slab Flattening Router Mill

The TrueTrac 48" x 96" Threaded Slab Flattening Router Mill is designed specifically to be able to handle large area planing operations. Easily flatten large slabs, table top glue-ups, epoxy resin counter or table tops, or other large projects that don't easily fit into standard floor model equipment for a much lower cost. The Manual Feed allows the user to directly push the router back and forth across and down the length of the slab, providing more movement control. For use with a standard 2-1

TrueTrac 48" x 96" Threaded Slab Flattening Router Mill

The TrueTrac 48" x 48" Threaded Slab Flattening Router Mill is designed specifically to be able to handle large area planing operations. Easily flatten large slabs, table top glue-ups, epoxy resin counter or table tops, or other large projects that don't easily fit into standard floor model equipment for a much lower cost. The Manual Feed allows the user to directly push the router back and forth across and down the length of the slab, providing more movement control. For use with a standard 2-1

TrueTrac 48" x 48" Threaded Slab Flattening Router Mill

The TrueTrac 22" x 48" Threaded Slab Flattening Router Mill is designed specifically to be able to handle large area planing operations. Easily flatten large slabs, table top glue-ups, epoxy resin counter or table tops, or other large projects that don't easily fit into standard floor model equipment for a much lower cost. The Manual Feed allows the user to directly push the router back and forth across and down the length of the slab, providing more movement control. For use with a standard 2-1

TrueTrac 22" x 48" Threaded Slab Flattening Router Mill

The TrueTrac 22" x 48" Threaded Slab Flattening Router Mill is designed specifically to be able to handle large area planing operations. Easily flatten large slabs, table top glue-ups, epoxy resin counter or table tops, or other large projects that don't easily fit into standard floor model equipment for a much lower cost. The Manual Feed allows the user to directly push the router back and forth across and down the length of the slab, providing more movement control. For use with a standard 2-1

TrueTrac 22" x 48" Threaded Slab Flattening Router Mill

Use the TrueTrac 84-1/2" Threaded Rod Lead Screw Kit 72" Capacity to easily convert a 72" Manual Feed Slab Flattening Router Mill into a Threaded Cross Feed Unit with this fully-assembled threaded rod kit. Designed to fit within a combined 27-1/2" and 55" rails for the 72" width capacity. Includes permanently sealed ball bearings, Acme lead nuts, and Acme threaded rod.

TrueTrac 84-1/2" Threaded Rod Lead Screw Kit 72" Capacity

The TrueTrac Blank Router Base Plate for Slab Flattening Router Mill allows you to add any existing Router Base Plate Assembly to accommodate any type, size, or style of router that isn't inlcuded in the standard base plate configuration. Switching the router base plate is easily done with just six screws. Customer will be responsible for transposing OEM base plate layout, drilling and countersinking to match OEM pattern, and opening the center hole with a bimetal hole saw to facilitate spoilboa

TrueTrac Blank Router Base Plate for Slab Flattening Router Mill

With the TrueTrac Router Base Adapter Plate Assembly for Slab Flattening Router Mill you can easily add a second router to your existing Slam Mill Kit. The router mounting plate is face-milled on both surfaces to ensure flatness and is made from 1/4" 6061 aluminum plate. Linear slides are fully CNC machined from solid copolymer Delrin with press-fit brass inserts for assembly. Aluminum components have a glass bead blast finish. Includes pre-drilled base plate, two drop downs, two short linear sl

TrueTrac Router Base Adapter Plate Assembly for Slab Flattening Router Mill

Self-spacing vertical character template set ensures the correct distance is maintained between characters without measuring. All templates are made of durable polymer material and come in different sizes of 1-1/2" (38mm) and 2-1/2" (64mm) in height. Compatible with the Milescraft 1206 SignCrafter and 1212 SignPRO sign making kits for routers. Features Create custom vertical signs using your own router Great for trail signs, mailboxes, door signs, wall art, or custom bar signs Includes

Milescraft 1-1/2" and 2-1/2" Vertical Letters Set for Sign Making Jigs 64pc

Self-spacing horizontal arrow and symbol template set ensures the correct distance is maintained between characters without measuring. Great addition to any sign making kit to create trail signs and custom wooden wall signs. All templates are made of durable polymer material and come in different sizes of 1-1/2" (38mm) and 2-1/2" (64mm) in height. Compatible with the Milescraft 1206 SignCrafter and 1212 SignPRO sign making kits for routers. Features Additional arrows and symbols allow fo

Milescraft 1-1/2" and 2-1/2" Symbols Set for Sign Making Jigs 26pc

Self-spacing horizontal arrow and symbol template set ensures the correct distance is maintained between characters without measuring. Great addition to any sign making kit to create trail signs and custom wooden wall signs. All templates are made of durable polymer material and come in different sizes of 1-1/2" (38mm) and 2-1/2" (64mm) in height. Compatible with the Milescraft 1206 SignCrafter and 1212 SignPRO sign making kits for routers. Features Additional arrows and symbols allow fo

Milescraft 1-1/2" and 2-1/2" Symbols Set for Sign Making Jigs 26pc

Self-spacing vertical character template set ensures the correct distance is maintained between characters without measuring. All templates are made of durable polymer material and come in different sizes of 1-1/2" (38mm) and 2-1/2" (64mm) in height. Compatible with the Milescraft 1206 SignCrafter and 1212 SignPRO sign making kits for routers. Features Create custom vertical signs using your own router Great for trail signs, mailboxes, door signs, wall art, or custom bar signs Includes

Milescraft 1-1/2" and 2-1/2" Vertical Letters Set for Sign Making Jigs 64pc

Self-spacing vertical character template set ensures the correct distance is maintained between characters without measuring. All templates are made of durable polymer material and come in size of 1-1/2" (38mm) in height. Compatible with the Milescraft 1206 SignCrafter and 1212 SignPRO sign making kits for routers. FeaturesCreate custom vertical signs using your own routerGreat for trail signs, mailboxes, door signs, wall art, or custom bar signsIncludes 1-1/2” tall letters (30 pieces)1-1/2” ver

Milescraft 1-1/2" Vertical Letters Set for Sign Making Jigs 30pc